Find a HMRTC Route

Metro Timings: 05:30 AM / 11:30 PM Helpline No.: 0124 2800028
Return Route

Belvedere Towers to Janpath Metro Route

Belvedere Towers Metro Station is — km away from you

Fare & Timings

Normal Fare: ₹74
HMRTC ₹20 · DMRC ₹54
Smart Card Fare: ₹69
First Train: 06:13 AM
Last Train: 08:03 PM
Powered by ixigo & ONDC
Book Metro Tickets on ixigo — First Free Metro Ticket

Station-by-Station Route

22 stations 2 interchanges 25 km 0 hrs 43 mins
Starts here Entry Gates
Rapid Line · Platform No.: 1 · Towards: Sector 55 56
Change here
Yellow Line · Platform No.: 2 · Towards: Samaypur Badli
Change here
Violet Line · Platform No.: 4 · Towards: Kashmere Gate
Ends here Exit Gates
  1. 1
    Start at Belvedere Towers station. Entry Gates
  2. 2
    Board the Rapid Line towards Sector 55 56 · from Platform 1
    Ride 3 stops to Sikandarpur.
    Change lines here
  3. 3
    Board the Yellow Line towards Samaypur Badli · from Platform 2
    Ride 16 stops to Central Secretariat.
    Change lines here
  4. 4
    Board the Violet Line towards Kashmere Gate · from Platform 4
    Ride 1 stop to Janpath.
  5. Arrive at Janpath station. You have reached your destination. Exit Gates

Gurgaon Metro Route Map 2026

Route from Belvedere Towers to Janpath on the map.

Download JPG
Belvedere Towers to Janpath Route Map
Loading map…
100%
Ctrl + Scroll to zoom · Drag to pan
Official Map

Route Summary

How to reach Janpath from Belvedere Towers by metro? Board the metro from Belvedere Towers station and travel through 20 intermediate metro stations. During the journey, you will need to change train at 2 interchange station(s) before reaching Janpath.

The approximate travel time between Belvedere Towers and Janpath is 0 hrs 43 mins. The total distance covered on this metro route is 25 Km. The first metro from Belvedere Towers departs at 06:13 AM, while the last train leaves at 08:03 PM.

The estimated metro fare for this route is ₹74. Smart card users may receive discounted fares. Parking facility is not available at either Belvedere Towers or Janpath station.

Estimated Travel Cost Comparison and Savings based on distance & typical fares in Indian cities.

ModeEst. CostSavings vs Metro
🚇 Metro₹74—
🏍 Bike₹220 ₹146 more
🛺 Auto₹330 ₹256 more
🚕 Cab₹540 ₹466 more
Powered by ixigo & ONDC

Pre-calculated Weekly/Monthly Fare Chart

The fare shown below is calculated for daily, weekly, and monthly travel which includes both up and down journey and for a single person.

PeriodCashSmart Card
Daily₹148₹137
Weekly (5 days)₹740₹686
Weekly (6 days)₹888₹823
Weekly (7 days)₹1,036₹960
Monthly (20 days)₹2,960₹2,744
Monthly (24 days)₹3,552₹3,293
Monthly (28 days)₹4,144₹3,842

Commuting with a Gurgaon Metro Smart Card saves up to ₹302 per month on this route.

Metro Ride Benefits

  • Carbon savings: 3.78 kg CO₂
  • Fuel savings: 1.67 litres
  • Time saved vs road: 32.2 minutes
  • Calories burned (walk to/from station): ~70 kcal

Safety Tips

  • Stand behind the yellow line while waiting for the train.
  • Keep your belongings secure and within sight at all times.
  • Let passengers exit before boarding.
  • Hold handrails while the train is moving.
  • In an emergency, use the help point or alert station staff.
Share route info feedback
Route Info
Fare Info
Timing Info
Platform Info

Address
DLF Cyber City, DLF Phase 2, Sector 25, Gurugram, Haryana 122002
Line & Network
Rapid Line Gurgaon Metro
Layout
Elevated (Side)
Areas Around
Nathupur Balveer Market DLF Phase 2 Shahpur S Block Belvedere Towers
Station Amenities
Accessible

Address
Jantar Mantar Road, Janpath, Connaught Place, New Delhi, Delhi 110001
Line & Network
Violet Line Delhi Metro
Contact
8130862199
Layout
Underground (Island)
Areas Around
Janpth Market HC Mathur Lane Kerala House Windsor Place Janpath
Station Amenities
Accessible
Train Frequency
PeakOff-Peak
Weekdays 3 min 24 sec 4 min 45 sec
Saturday 4 min 00 sec 5 min 16 sec
Sunday 5 min 10 sec 5 min 10 sec
Nearby Bus Stop
Shivaji Stadium Terminal Bus Stop
641 m away
Buses from Shivaji Stadium Terminal
100 104 114+990 114+990E 139 156 157A 167 171 246CL 317 331LNKSTL 450LNKSTL 522CL 712 728A 803CL 840 85 859 859STL 85AEXT 85BEXT 85EXT 871 871A 893 91 943 990CL 990E_CL 997

Belvedere Towers to Janpath Metro Route FAQs

There are 22 stations between Belvedere Towers and Janpath on this metro route, spanning a total distance of approximately 25 km from end to end.

Yes, this journey starts on the Rapid Line from Belvedere Towers and ends on the Violet Line at Janpath, so you will need to interchange 2 time(s) along the way.

The journey from Belvedere Towers to Janpath takes approximately 0 hrs 43 mins at an average metro speed of around 35 km/h, covering 25 km in total.

This route starts on Gurgaon Metro at Belvedere Towers and ends on Delhi Metro at Janpath, so you will interchange between two different operators' systems during the journey.

No, parking facility is not currently available at Belvedere Towers metro station, so if you are boarding the Rapid Line here, consider a drop-off or nearby alternate parking option.

No, parking facility is not currently available at Janpath metro station, so passengers planning to drive from this end are advised to arrange alternate parking nearby in advance.

The total distance between Belvedere Towers and Janpath on this metro route is approximately 25 km, covered in about 0 hrs 43 mins at typical metro speeds.

Start on the Rapid Line at Belvedere Towers on Gurgaon Metro, then interchange onto the Violet Line to reach Janpath on the Delhi Metro network at the other end.

The estimated normal fare from Belvedere Towers to Janpath is ₹74, while smart card users can travel the same 25 km route for around ₹69.

The first metro from Belvedere Towers towards Janpath departs at 06:13 AM, and the last train on this route leaves at 08:03 PM, so plan your journey within this window.
Book Metro Tickets on ixigo — First Free Metro Ticket Book Metro Tickets on ixigo — First Free Metro Ticket
Saved Routes
No saved routes yet. Tap Save Route on any route page.